Poiščite ustrezne rezervne dele ali dodatke za vaše izdelke Einhell.
The Einhell wall chaser TE-MA 1700 mills horizontal and vertical grooves and channels for pipes or the like into the masonry. Compared to working with pure "muscle power" in conjunction with a hammer and chisel, the wall chaser is recommended for all milling work on hard materials, solely due to time and power savings. The wall chaser produces dimensionally accurate cuts or grooves in the masonry using two cutting discs running parallel to one another with 1,700 W power. The recess for cables, for example, is chiseled out after the rough work with a rotary hammer or other suitable tool. The very powerful motor ensures the best milling results, the infinitely variable milling depth adjustment and the individual cutting width adjustment for narrow and wide grooves allow maximum flexibility. The large handle provides easy and safe operation. The safe application is supported by the soft start and the pulling cut. The overload protection ensures longevity and protection for the user. The guide roller and the additional handle support the comfortable handling through a firm, secure hold. Marking the cutting wheel position allows precise positioning of the device and dimensionally accurate cuts. The wall chaser has a spindle lock for easy disc replacement. Thanks to the suction adapter, the wall chaser is compatible with the Einhell wet/dry vacuum cleaners. The 4-metre-long cable ensures a large operating radius in use. Delivery includes a storage bag for clean and safe transport as well as four diamond cutting discs, so that you can start your project right away.
|Mains supply||220-240 V | 50 Hz|
|Idle speed||7000 min^-1|
|Cutting disc||150 mm x 22.2 mm|
|Groove depth||8 mm - 40 mm|
|Groove width||8 mm - 38 mm|
Odkrijte naše brezplačne storitve podaljšanja garancije za vaše izdelke ali baterije Einhell.
Izdelek je bil dodan na primerjalni seznam.Odprite primerjalni seznam